Contact us on +39 0322 96142 or

Valve Module for Heavy Duty Tool Changers

Valve Module for Heavy Duty Tool Changers

XCHANGE™ Utility Module

Valve Module for Heavy Duty Tool Changers

Single Actuating Valve provides a single input to actuate the robot adaptor during an automatic tool changing operation.


• Compact design
• 5/2 monostable valve defaults the tool changer to a COUPLED state (safe state)
• In accordance with the EC Machinery Directive 2006/42/EC
• Manual actuation by means of a push botton

Compatible XCHANGE™ Tool Changers: E125, E160, E200, and E315

Datasheet ModelWeight

kg (lb)
Operating Voltage

Operating Pressure

bar (psi)
Standard Nominal
Flow Rate

Transportation & Storage
Temperature Humidity
24 ± 10%5 - 7
(72 – 101)
Up to 75%,
Temperature 10-40°C (50-104 °F)

Operating Temperature 5 - 60 °C (40 - 140 °F)
Noise Emissions (Sound Pressure) ≤ 70 dB(A) in any direction

The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.


M12 5 PIN Male Connector for Valve Command

1 Not used The solenoid coil is equipped
with a protective circuit to arrest sparks
and prevent polarity reversal.
2  + or –
3  + or –
4 Not used
5 Not used


5/2 Spring-Return Valve, Pilot Actuated