SWINGTOOL

EFFECTO GROUP > Automazione > Utensili di Sbavatura e Finitura > molatura > SWINGTOOL

SWINGTOOL

Brushing and grinding tools – compliance pendulous

SWINGTOOL

The radial grinding tool SWINGTOOL SERIES 100 can be used for deburring after machining, rounding of sharp edges (particularly in badly accessible areas) as well as for light deflashing. The spindle is radially compliant while the necessary pressure is monitored by program control.

Scheda tecnica	.............Model.............	Power	Idling speed	Rated speed	Compliance	Compliance torque @ 6 bar	Feed forward rate	Fluid consumption	Motor shaft	Collet	Weight
	SWINGTOOL 125	390 W	5600 rpm	2600 rpm	± 3.8° (pendulous)	2.4 Nm	5 - 100 mm/s	8.3 l/s		Ø6 mm	3.5 kg
	SWINGTOOL 128	240 W	3840 ( r ) rpm	1960 ( r ) rpm	12 mm (pendulous)	2.4 Nm	5 - 100 mm/s	8.3 l/s	Ø12x31.5		3.5 kg
	SWINGTOOL 155	390 W	3100 rpm	1460 rpm	± 3.8° (pendulous)	2.4 Nm	5 - 100 mm/s	8.3 l/s		Ø6 mm	3.5 kg
	SWINGTOOL 158	240 W	2090 ( r ) rpm	1090 ( r ) rpm	± 3.8° (pendulous)	2.4 Nm	5 - 100 mm/s	8.3 l/s	Ø12x31.5		3.5 kg
	SWINGTOOL 178	240 W	14000 ( r ) rpm	7000 ( r ) rpm	± 3.8° (pendulous)	2.4 Nm	5 - 100 mm/s	7.8 l/s	Ø12x31.5		3.5 kg
	SWINGTOOL 181	600 W	15000 rpm	8000 rpm	± 3.8° (pendulous)	2.4 Nm	10 - 200 mm/s	17.5 l/s	Ø16x40		3.8 kg
	SWINGTOOL 185	760 W	7000 rpm	5600 rpm	± 3.8° (pendulous)	2.4 Nm	11 - 200 mm/s	18.9 l/s		Ø6 mm	3.8 kg
	SWINGTOOL 186	760 W	7000 rpm	5600 rpm	± 3.8° (pendulous)	2.4 Nm	12 - 200 mm/s	18.9 l/s	Ø12x31.5		3.8 kg
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.