Sensori magnetici – Magnetic switches
I seguenti modelli di sensori sono di tipo normalmente aperto. Il grado di protezione è IP67. Sono disponibili in versione “REED” oppure “effetto HALL”. Per pinze con il dispositivo di sicurezza con molla è consigliato l’uso dei sensori di tipo “Hall”.
The following switches are normally open type. The protection degree is IP67 norme IEC. They are available in “REED” or “HALL effect” versions. We suggest to use “Hall” switch model on grippers equipped with safety spring.
FOH
- Tipo “REED”, 2 fili, tensione 12-24 V, corrente 5-20 mA, lunghezza cavo 3 m
- “REED” type, 2 wires, voltage 12-24 V, 5-20 mA power, cable length 3 m


FOV
- Tipo “REED”, 2 fili, tensione 10-24 V, corrente 5-20 mA, lunghezza cavo 3 m
- “REED” type, 2 wires, voltage 10-24 V, 5-20 mA power, cable length 3 m


TOH
- Tipo “REED”, 2 fili, tensione 12-24 V, corrente 5-50 mA, lunghezza cavo 3 m
- “REED” type, 2 wires, voltage 12-24 V, 5-50 mA power, cable length 3 m


TOV
- Tipo “REED”, 2 fili, tensione 12-24 V, corrente 5-50 mA, lunghezza cavo 3 m
- “REED” type, 2 wires, voltage 12-24 V, 5-50 mA power, cable length 3 m


DSL 1 C
- Tipo “REED”, 2 fili, tensione 3-24 V, corrente 100 mA, lunghezza cavo 2.5 m
- “REED” type, 2 wires, voltage 3-24 V, 100 mA power, cable length 2.5 m


F2H
- Tipo “HALL”, 2 fili, tensione 10-24 V, corrente 5-20 mA, lunghezza cavo 1 m
- “HALL” type, 2 wires, voltage 10-24 V, 5-20 mA power, cable length 1 m


F2V
- Tipo “HALL”, 2 fili, tensione 10-24 V, corrente 5-20 mA, lunghezza cavo 1 m
- “HALL” type, 2 wires, voltage 10-24 V, 5-20 mA power, cable length 1 m


T2H
- Tipo “HALL”, 2 fili, tensione 10-30 V, corrente 5-25 mA, lunghezza cavo 3 m
- “HALL” type, 2 wires, voltage 10-30 V, 5-25 mA power, cable length 3 m


T2V
- Tipo “HALL”, 2 fili, tensione 10-30 V, corrente 5-25 mA, lunghezza cavo 3 m
- “HALL” type, 2 wires, voltage 10-30 V, 5-25 mA power, cable length 3 m


T3PH
- Tipo “HALL”, 3 fili, tensione 10-28 V, corrente 100 mA, lunghezza cavo 3 m
- “HALL” type, 3 wires, voltage 10-28 V, 100 mA power, cable length 3 m


MZCG-127PS-KUO
- Tipo “HALL”, 3 fili, tensione DC 10-30 V, corrente 100 mA, PNP-NA, lunghezza cavo 2m
- “HALL” type, 3 wires, voltage DC 10-30 V, 100 mA power, PNP-N/O, cable length 2m


MZCG-127PS-KRO
- Tipo “HALL”, M8 maschio – 3 pin, tensione DC 10-30 V, corrente 100 mA, PNP-NA, lunghezza cavo 0,5 m
- “HALL” type, M8 male – 3 pin, voltage DC 10-30 V, 100 mA power, PNP-N/O, cable length 0.5m


MODELLO PINZA GRIPPER MODEL | SENSORE SWITCH |
||||||
---|---|---|---|---|---|---|---|
FOH FOV | F2H F2V | TOH TOV | T2H T2V | T3PH | DLS1C | MZCG | |
OPL 12, OPL 45-3 | ● | ● | |||||
HPG | ● | ||||||
OPE | ● | ● | ● | ● | |||
QPG 306/S | ● | ● | |||||
QPG / QPGB | ● | ● | ● | ● | |||
OPH | ● | ● | ● | ● | |||
LPG | ● | ● | ● | ● | |||
OG-A | ● | ● | ● | ● | |||
OLE | ● | ● | |||||
OF | ● | ● | ● | ● | |||
VRG | ● | ● | ● | ● |
MODELLO ATTUATORE SWIVEL MODEL | SENSORE SWITCH |
|||
---|---|---|---|---|
TOH TOV | T2H T2V | T3PH | DLS1C | |
AR16 | ● | ● | ||
AR, AR-DIS, AR-COL | ● | ● | ● | ● |
PS | ● | ● | ● | ● |
• Gli articoli non presenti in tabella non sono predisposti per il controllo con il magnete. Vedere tabella successiva “sensori di prossimità”.
• The items that are not in the table have not the magnet control. See the following chart “Proximity switches”.
Sensori di prossimità* – Proximity switches*
*L’impiego di questi sensori prevede il montaggio di staffe porta micro – * The use of these switches requireds switch brackets mounting
I seguenti modelli di sensori sono di tipo PNP normalmente aperto. Il grado di protezione è IP67. Tutti hanno tre fili e la lunghezza del cavo standard é di 2 m.
The following switches are PNP normally open. The protection degree is IP67 norme IEC. and standard length cable 2 m.
SM5
- Distanza intervento 0.8 mm, tensione 10-30 V, corrente 200 mA max
- Operating distance 0.8 mm, voltage 10-30 V, 200 mA power max


S6.5
- Distanza intervento 2 mm, tensione 10-30 V, corrente 200 mA max
- Operating distance 2 mm, voltage 10-30 V, 200 mA power max


SM8
- Distanza intervento 2 mm, tensione 10-30 V, corrente 200 mA max
- Operating distance 2 mm, voltage 10-30 V, 200 mA power max


SM12
- Distanza intervento 2 mm, tensione 10-30 V, corrente 200 mA max
- Operating distance 2 mm, voltage 10-30 V, 200 mA power max


SM18
- Distanza intervento 5 mm, tensione 10-30 V, corrente 200 mA max
- Operating distance 5 mm, voltage 10-30 V, 200 mA power max


MODELLO PINZA GRIPPER MODEL | SENSORE SWITCH |
||||
---|---|---|---|---|---|
SM5 | S6.5 | SM8 | SM12 | SM18 | |
OPL | ● | ||||
LGE | ● | ||||
OPE | ● | ||||
QPG205/306 | ● | ||||
QPG / QPGB | ● | ||||
OPH | ● | ||||
OG | ● | ||||
OG 575-8° | ● | ||||
OG-A | ● | ||||
OF | ● | ||||
GPAL | ● | ● | |||
X-RAY-S | ● | ● | ● |
MODELLO ATTUATORE SWIVEL MODEL | SENSORE SWITCH |
|
---|---|---|
S6.5 | SM8 | |
AR, AR-DIS, AR-COL | ● | ● |
PS | ● | ● |