Swivel heads
PS
The jointed loaders are rotating tools prepared for the application of a pair of grippers to be used in all the operations serving tool machines, unmachined piece loading, finished piece unloading, etc..
The joint rotation, supported on prestressed oblique bearing, is assured by a pair of rack pistons.
Advantages
- The rotation is adjustable, with a deviation of +- 2°, using two micrometric pushrods, the deceleration is via built-in hydraulic shock absorbers and rotation is controlled by integrated sensors.
- The loader body incorporates a distributor unit for direct input to the grippers (applied to the right angle joint), the shaft is bored internally for the passage of the cables of the sensor that reads the position of the pincers.
- After technical verification of the dimensions, all the grippers models can be applied with aid of the correct interfacing plate, supplied on request.
| Model | Rotation angle | Fluid consumption double stroke | Theoretical rotation torque @ 6 bar | Weight | Repeat accuracy |
|---|---|---|---|---|---|
| PS 25 | 180° | 133 cm³ | 1.2 daNm | 5.6 kg | ± 0.01 mm |
| PS 32 | 180° | 258 cm³ | 2.4 daNm | 7.5 kg | ± 0.01 mm |
| PS 45 | 180° | 560 cm³ | 5.2 daNm | 16 kg | ± 0.01 mm |
| PS 50 | 180° | 832 cm³ | 7.7 daNm | 29 kg | ± 0.01 mm |
| The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice. | |||||
