FLEXITOOL Deburring Tool

FLEXITOOL

Deburring tools – with and without compliance

FLEXITOOL

The FLEXITOOL is designed for the efficient deburring of bore-intersections and bore surfaces. Drills or reamers can be inserted without problems in bores due to the Floating chuck. The floating chuck can compensates radial and angular misplacement errors between bore and tool axis when inserting the drills or reamers. The FLEXITOOL 170 is axially movable. The necessary feed forward force can be set by the program control. Because of that the drill or the reamer is freely compliable in all directions.

Datasheet	...........Model...........	Power	Idling speed	Rated speed	Compliance	Compliance force @ 6 bar	Fluid consumption	Tool mounting	Weight
	FLEXITOOL 110	240 - 600 W	550 - 18000 rpm	260 - 10000 rpm	12 mm (axial)	approx. 60 N	8.3 - 17.5 l/s	Drill chuck or collet	2 - 2.5 kg
	FLEXITOOL 150	390 W	550 rpm	259 rpm	12 mm (axial)	approx. 60 N	8.3 l/s	Collet ESX12 Ø6 mm	1.8 kg
	FLEXITOOL 170	390 W	550 rpm	259 rpm	12 mm (axial)	approx. 60 N	8.3 l/s	Collet ESX12 Ø6 mm	3.7 kg
	FLEXITOOL 210	830 W	2550 min -1	1280 min -1	16 mm (axial)	approx. 135 N	17 l/s	Shaft Ø16j6 x 40 mm	2.3 kg
	FLEXITOOL 250	830 W	570 min -1	290 min -1	16 mm (axial)	approx. 135 N	17 l/s	Shaft Ø16j6 x 40 mm	2.5 kg
	FLEXITOOL 270	830 W	570 min -1	290min -1	16 mm (axial)	approx. 135 N	17 l/s	Collet ER25 Ø8 mm	7 kg
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.