Contact us on +39 0322 96142 or info@effecto.com

E125LP Electrical Modules

E125LP Electrical Modules

XCHANGE™ Utility Module

E125LP Electrical Modules

Electrical Modules pass signals during an automatic tool changing operation.

Advantages

• Flexible Connection Options
• Aluminum construction to reduce EMI
• Low-Profile to minimize end effector height
• Replacement probes for fast and easy maintenance
• IP65 when coupled

Datasheet ModelDescriptionUser ConnectionRated Current

A		Rated Voltage

V (AC/DC)		Couple/Uncouple
Sensor Interface		Tool
Identification Included		Weight**

kg (lb)
E125LP-R-D-PG-20.05-00-NRobot Adaptor - Strain ReliefStrain Relief
(6.0 mm – 12.0 mm OD)
20x Max. Wire Gauge: 22 AWG		5 *1000 *NoN/A0.30
(0.66)
E125LP-T-D-PG-20.05-00-NTool Adaptor - Strain ReliefStrain Relief
(6.0 mm – 12.0 mm OD)
20x Max. Wire Gauge: 22 AWG		5 *1000 *N/ANo0.35
(0.77)
E125LP-R-D-M23-17.05-00-NRobot Adaptor - Discrete M2317 PIN, M23 "E" CW5125OptionalN/A0.30
(0.66)
E125LP-T-D-M23-17.05-00-NTool Adaptor - Discrete M2317 SOC, M23 "P" CCW5125N/AOptional0.35
(0.77)
E125LP-R-D-MS-18.05-00-NRobot Adaptor - Discrete MS18 PIN, MS3112E14-18P5600OptionalN/A0.30
(0.66)
E125LP-T-D-MS-18.05-00-NTool Adaptor - Discrete MS18 SOC, MS3112E14-18S5600N/AOptional0.35
(0.77)
E125LP-T-D-N-0.05-15-N ***Tool Adaptor - Tool IdentificationN/A (Tool ID Only)Up to 15 Tools128N/AYes0.35
(0.77)
E125LP-R-PN-M12-5.16/4.05-P-00-NRobot Adaptor - Profinet4 SOC, M12 D-CODED
5 PIN, M12 L-CODED
5 PIN, M12 A-CODED		416425063250YesN/A0.30
(0.66)
E125LP-T-PN-M12-5.16/4.05-00-NTool Adaptor - Profinet4 SOC, M12 D-CODED
5 SOC, M12 L-CODED		41625063N/ANo0.35
(0.77)
E125LP-R-S-M23-6.16/17.05-00-NRobot Adaptor - Servo M2317 PIN, M23 ""E"" CW
6 PIN, M23 ""E"" CW		516125630NoN/A0.30
(0.66)
E125LP-T-S-M23-6.16/17.05-00-NTool Adaptor - Servo M2317 SOC, M23 ""P"" CCW
6 SOC, M23 ""P"" CCW		516125630N/ANo0.35
(0.77)

* Rated Current/Voltage may change based upon cable/wire rating.
** Module weight may vary depending on specific configuration.
*** Tool Identification Module can be used with any Robot Adaptor Modules listed above it.
Operating Temperature 5 - 60 °C (40 - 140 °F)
Noise Emissions (Sound Pressure) ≤ 70 dB(A) in any direction
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.

CONTACT PROBE TECHNOLOGY

Applied Robotics XCHANGE™
electrical modules use spring
loaded contact probes for their many benefits:
• Low contact resistance
• High mating cycles
• Limited debris buildup
• Minimal maintenance