Contact us on +39 0322 96142 or info@effectogroup.com
CNC-FLEXICUT

Deburring for CNC powered by air motor – compliance radial

CNC-FLEXICUT

CNC-Flexicut 250 is a deburring tool that removes the burrs in CNC-machines generated by the machining process.
It follows the undefined edges which are generated between machined and raw surface and can compensate edge deviations of up to 8 mm.

ADVANTAGES

  • Due to the unique cardanic suspension of the spindle it is possible to deburr around corners without chang-ing the tool orientation. The pressure against the part is set by a pressure control valve. This allows a variation of the chamfer width.
  • The tool is driven by an air spindle. The high speed of the spindle (35’000 rpm) allows high feed rates of up to 15 m/min.
  • Spindle driven by the air that is used to flush out the tool-taper and/or the cooling water line.
  • During the deburring process the main spindle of the Center is standing still.
  • Can be stored in the normal toolrack.
  • Commercial milling inserts can be used which allows the deburring of all type of materials.

ModelTool adapterPowerIdling speedCompliance torque

@ 6 bar
Compliance force

@ 6 bar
Feed forward rateFluid consumptionWeight
CNC Flexicut 250-W25Weldon 25240 W35000 rpm1.04 Nm8 N (at collet)2 - 15 m/min7.5 l/s4.9 kg
CNC Flexicut 250-SK40SK 40240 W35000 rpm1.04 Nm8 N (at collet)2 - 15 m/min7.5 l/s5.4 kg
CNC Flexicut 250-SK50SK 50240 W35000 rpm1.04 Nm8 N (at collet)2 - 15 m/min7.5 l/s7.6 kg
CNC Flexicut 250-HSK63HSK 63240 W35000 rpm1.04 Nm8 N (at collet)2 - 15 m/min7.5 l/s5.3 kg
CNC Flexicut 250-HSK80HSK 80240 W35000 rpm1.04 Nm8 N (at collet)2 - 15 m/min7.5 l/s6.0 kg
CNC Flexicut 250-HSK100HSK 100240 W35000 rpm1.04 Nm8 N (at collet)2 - 15 m/min7.5 l/s7.0 kg

Powered by Air motor
Compliance radial in all directions ± 4.2° / ± 8 mm (at collet)
Collet Ø 6mm (optional 3 & 8mm & 1/4″)

The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.