CIRC-FLEXIBRUSH Radial Brushing Tool

CIRC-FLEXIBRUSH

Brushing tools – compliance radial

CIRC-FLEXIBRUSH

CIRC-FLEXIBRUSH radial brushing tool can be used for deburring of large parts after machining, rounding of sharp edges (particularly in badly accessible areas) as well as for light deflashing. The brushing spindle is radially compliant while the necessary pressure is monitored by program control and the wear of the brush is monitored by a sensor and compensated by program control. Versions with reversible motors are available.

Datasheet	....................Model....................	Power	Idling speed	Rated speed	Compliance movement	Compliance force @ 6 bar	Feed forward rate	Fluid consumption	Motor shaft	Weight
	CIRC-FLEXIBRUSH 219	840 W	2500 rpm	1280 rpm	16mm (axial)	approx. 135 N	20 - 200	17 l/s	Ø16j6x40	6.7 kg
	CIRC-FLEXIBRUSH 222	840 W	4200 rpm	2100 rpm	16 mm (axial)	approx. 135 N	20 - 200	17 l/s	Ø16j6x40	6.7 kg
	CIRC-FLEXIBRUSH 225	840 W	6700 rpm	3300 rpm	16 mm (axial)	approx. 135 N	20 - 200	17 l/s	Ø16j6x40	6.7 kg
	CIRC-FLEXIBRUSH 220	620 W	2000 ( r ) rpm	1020 ( r ) rpm	16 mm (axial)	approx. 135 N	20 - 200	14.5 l/s	Ø16j6x40	6.7 kg
	CIRC-FLEXIBRUSH 230	620 W	3350 ( r ) rpm	1700 ( r ) rpm	16 mm (axial)	approx. 135 N	20 - 200	14.5 l/s	Ø16j6x40	6.7 kg
	CIRC-FLEXIBRUSH 232	620 W	5250 ( r ) rpm	2650 ( r ) rpm	16 mm (axial)	approx. 135 N	20 - 200	14.5 l/s	Ø16j6x40	6.7 kg
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.