CCR-LA

EFFECTO GROUP > Automation > Compliance Devices > for assembly insertion > CCR-LA

CCR-LA

Compliance Device for assembly insertion

with lock-up function – LA SERIES

Compliance devices compensates for errors (position and/or angular and/or torsional) occurred during an assembly that various precision parts are press or loose fitted into the holes.
Thereby, it reduces assembly failure, enhances product quality, and shortens the cycle time in production line.

Advantages

Significant reduction of assembly failure due to center position errors
Uniform press-fitting quality
Wide range of applications
Increased binding force between parts
Saves assembly line construction time, reduces equipment investment cost
Enhanced operation rate
Longer life cycle of the assembler
Simple maintenance

Automatic correction of a position/angle error

Datasheet	3D Drawing	.................Model.................	Compliance center length P	Payload	Compensation range - Position error	Compensation range - Angle	Compensation range - Torsional angle	Axial direction - Compressional	Axial direction - Tensile	Horizontal direction	Torsional direction	Allowable maximum force	Tube external diameter	Weight
		CCR-LA6-060-060	60 mm	19.6 N	±2 mm	±2°	±6.0°	1180.9 N/mm	143.1 N/mm	11.8 N/mm	3 N/mm/rad	0.5 Mpa	4 mm	0.1 kg
		CCR-LA6-070-065	70 mm	26.5 N	±2 mm	±2°	±6.6°	1573.9 N/mm	191.1 N/mm	11.8 N/mm	4.2 N/mm/rad	0.5 Mpa	4 mm	0.1 kg
		CCR-LA6-080-070	80 mm	26.5 N	±2 mm	±2°	±6.2°	1573.9 N/mm	191.1 N/mm	11.8 N/mm	4.2 N/mm/rad	0.5 Mpa	4 mm	0.2 kg
		CCR-LA6-090-078	90 mm	37.3 N	±2 mm	±2°	±5.5°	1217.2 N/mm	225.4 N/mm	12.4 N/mm	6.1 N/mm/rad	0.5 Mpa	4 mm	0.2 kg
		CCR-LA6-100-084	100 mm	37.3 N	±2 mm	±2°	±5.0°	1217.2 N/mm	225.4 N/mm	12.4 N/mm	6.1 N/mm/rad	0.5 Mpa	4 mm	0.2 kg
		CCR-LA6-110-088	110 mm	37.3 N	±2 mm	±2°	±4.6°	1217.2 N/mm	225.4 N/mm	12.4 N/mm	7 N/mm/rad	0.5 Mpa	4 mm	0.3 kg
		CCR-LA6-120-095	120 mm	37.3 N	±2 mm	±2°	±5.1°	1217.2 N/mm	225.4 N/mm	12.4 N/mm	7 N/mm/rad	0.5 Mpa	4 mm	0.4 kg
		CCR-LA6-130-099	130 mm	37.3 N	±2 mm	±2°	±5.1°	1217.2 N/mm	225.4 N/mm	12.4 N/mm	7 N/mm/rad	0.5 Mpa	4 mm	0.4 kg
		CCR-LA6-140-108	140 mm	78 N	±2 mm	±2°	±4.8°	1840.4 N/mm	407.7 N/mm	15.1 N/mm	7.7 N/mm/rad	0.5 Mpa	4 mm	0.4 kg
		CCR-LA6-150-130	150 mm	78 N	±2 mm	±2°	±4.2°	1840.4 N/mm	407.7 N/mm	15.1 N/mm	7.7 N/mm/rad	0.5 Mpa	4 mm	0.5 kg
Model: customized order is available Acceptable assembly tool load: Please contact us if this value is exceeded. This value can be doubled when Center Master is installed in the vertical direction. Elasticity coefficient indicates the elasticity of the elastic center (P) – the average value before the stopper of Center Master begins to work. Recommended operating pressure: 5 bar * Center Master can correct up to ±2 mm of an error, but this value is changed according to the chamfer value.
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.